LED tutorial forum

@Freedom_Fighter and @Amoril:

What is the big difference for you guys using UV supplementary lighting?
I'm just exploring and have used it last year in my Shed Shack grow but can't say that I saw big improvement or experienced a better/different high.
It was properly underpowered for the surface and I did use different LED's and CMH in that grow also.
Still very interested in first hand experiences!
 
It was properly underpowered for the surface and I did use different LED's and CMH in that grow also.
Still very interested in first hand experiences!
If you were running your cmh in an open balast, then your plants were already getting extra UV. You might not notice as much of a difference adding extra UV, than you would if you had 't already been suplying some.
 
@Freedom_Fighter and @Amoril:

What is the big difference for you guys using UV supplementary lighting?
I'm just exploring and have used it last year in my Shed Shack grow but can't say that I saw big improvement or experienced a better/different high.
It was properly underpowered for the surface and I did use different LED's and CMH in that grow also.
Still very interested in first hand experiences!
@Swifty So I started using those reptile bulbs when I was flowering with HPS. They made a noticeable improvement in resin production at that stage. What @Diesel840 is also true, if youre using a CMH in a reflector that does not have a glass shield, youre already getting some UV.

Heres my secret. I dont add UV lighting in flower typically, I let the CMH do its thing. I might sprinkle a few light sockets with y-adapters around the perimeter, so I can add a CFL + UVcfl around the perimeter if somewhere isnt getting lit well.....

..... but my veg lighting has UV added. I veg under 2 x 4ftx4bulb T5HO panels. so like 432w of t5HO. my spectrum per panel is 2x 6400k, 1x 2700k, 1x UV reptile bulb.

my reasoning is that THC is a terpenophenolic compound, so to maximize THC we need to maximize precursor chemicals. that process doesnt have to start in bloom. When I veg plants with UV lighting, I notice they smell stronger, sooner. stem rubs and all that.
 
The purplish one is throwing UV... and actually the one on the left is some sort of 6400k "mixed spectrum" bulb im playing with from SunBlaster. if you look closely, its reflection has a pinkish hue that isnt on the far right 6400k bulb. Not sure that I would pay a premium for them, but I found a shop selling them for 8 bucks each. not a bad deal at that price.
 

Attachments

  • 20250115_002350.jpg
    20250115_002350.jpg
    1.8 MB · Views: 3
man, Ive been using reptisun 10s for supplemental UV lighting for 16 years or so. they come in CFL, t5ho, and t8


Cool, I've looked at those before, but never tried them. I was close a few times to giving them a try but never did. I watched a MIGRO review video on a reptile uvb bulb that discouraged me. Perhaps the Reptisun is a better, more efficient brand than the one he tested:

UV Grow Light Comparison | UV Grow Light Guide | Solacure Philips Agromax || MIGRO Shane (10/10/19)

I've been holding out awhile now for the arrival of a good quality UVB LED diode to hit the market; so, I got a bit excited yesterday when I found a few companies now includng them to their gear.

Then I took a closer look at the warranties. They only come with a 1 yr warranty, so I think I'm going to pass on them for now, at that price. They are crazy expensive for a 1 yr warranty. I'd rather go for a florescent uvb.

I was leaning toward the Solacure brand until I saw the MIGRO Review; which is 5 years old now. At that time, Shane was negative about it, but 5 yrs is a long time. Maybe it's improved since. I'll look into that; but as of this present time, I'm likely to pick up a couple of the MIGRO UVB bulbs.

MIGRO UVB 310 Grow Light Unboxing & Setup || MIGRO Shane

LED UV Grow Light Vs Fluorescent UV Grow Light || MIGRO Shane

TEST Results of the MIGRO UVB Light (and the MIGRO Array 8 Pro) Are In; and They Are Good!
 
Last edited:
The purplish one is throwing UV... and actually the one on the left is some sort of 6400k "mixed spectrum" bulb im playing with from SunBlaster. if you look closely, its reflection has a pinkish hue that isnt on the far right 6400k bulb. Not sure that I would pay a premium for them, but I found a shop selling them for 8 bucks each. not a bad deal at that price.

Cool. A few months ago I was considering buying an 8 bulb T5 fixture, until I found out EYE Hortilux closed up its North American operations. They had a bad-ass set of T5 Grow Bulbs that I wanted. Guess I should take a closer look at Sunblaster. Is that the best T5 full spectrum grow bulb out there atm? I need it/them for a special application.
 
Last edited:
Cool, I've looked at those before, but never tried them. I was close a few times to giving them a try but never did. I watched a MIGRO review video on a reptile uvb bulb that discouraged me. Perhaps the Reptisun is a better, more efficient brand than the one he tested:

UV Grow Light Comparison | UV Grow Light Guide | Solacure Philips Agromax || MIGRO Shane (10/10/19)

I've been holding out awhile now for the arrival of a good quality UVB LED diode to hit the market; so, I got a bit excited yesterday when I found a few companies now includng them to their gear.

Then I took a closer look at the warranties. They only come with a 1 yr warranty, so I think I'm going to pass on them for now, at that price. They are crazy expensive for a 1 yr warranty. I'd rather go for a florescent uvb.

I was leaning toward the Solacure brand until I saw the MIGRO Review; which is 5 years old now. At that time, Shane was negative about it, but 5 yrs is a long time. Maybe it's improved since. I'll look into that; but as of this present time, I'm likely to pick up a couple of the MIGRO UVB bulbs.

MIGRO UVB 310 Grow Light Unboxing & Setup || MIGRO Shane

LED UV Grow Light Vs Fluorescent UV Grow Light || MIGRO Shane

TEST Results of the MIGRO UVB Light (and the MIGRO Array 8 Pro) Are In; and They Are Good!
im watching those videos now, so my input may be incorrect here

but the reptisun bulb is designed to keep reptiles that require high amounts of UVB, alive in terrariums. They work for that. So they clearly throw more UVB than not doing anything.

Also, in the chameleon / dragon world, Reptisun is considered a better bulb than Exo-Terra. Lasts longer, has higher UV output.

If Im working for MiGRO trying to sell a UV light, im certainly going to test it vs the weak reptile bulb... and to that effect, he didnt even choose the highest outputting UVB bulb from exoterra. They have a 100, 150, 200, and 300. hes comparing vs the 200
 
Perhaps the Reptisun is a better, more efficient brand than the one he tested:
I've never tried them when growing plants, but as a previous owner of iguanas, I can assure you that Reptisun is the best brand for uv reptile bulbs. The penetration and amount of UV surpasses all the other brands offered in the US. Without proper UV, Iguanas develop metabolic bone disease. Not so much fun 😥
 
@Freedom_Fighter that video of the mammoth vs migro is interesting. the mammoth has 1 UVB diode for every 16 UVA diodes, i think is what he said. If you only consider the UVB diodes, its more efficient by a large margin, but its diluted by so many UVA diodes.

Not going to lie, the MiGRO is interesting. I checked out the price lmao. I probably wont try it currently though, as it doesnt suit my setup. Only appears to come in 18w T8. In my veg tent (which ive long believed is where the magic happens anyhow), I could maybe squeeze another reflector it, but i dont want to.

but if we do the math, 18w bulb. 75% of that is UVB per their claim. so at a direct conversion, we get 13.5w UVB.

with the zoomed reptisun, the 10.0 is supposed to have 10% of its output be UVB. or at least thats the claim. I havent personally verified it, also havent seen people claiming its not (remember, its the most trusted bulb in rare reptile world). but assuming it is, that would be 5.4w of UVB. My veg tent has 10.8w. out of 432w total, so a small percentage. But also only a few watts less than if I had the MiGRO light.

edited because my maths didnt math
 
Last edited:
@Freedom_Fighter and @Amoril:

What is the big difference for you guys using UV supplementary lighting?
I'm just exploring and have used it last year in my Shed Shack grow but can't say that I saw big improvement or experienced a better/different high.
It was properly underpowered for the surface and I did use different LED's and CMH in that grow also.
Still very interested in first hand experiences!

Hey Swifty, thanks for asking. My last 4 LEDs came with built-in UVA; and I've never used supplemental UVB, though I've been looking into it and wanting to try it for years. I've been holding out waiting for good UVB LED diodes to hit the market; while watching all these interesting bloom booster LED lights hit the market; but all still very costly still, so I've delayed longer than I wanted to, hoping for increasing competition to drive prices down.

As you may recall from a different thread, I finally took the plunge and bought a set last Dec. 2, only to find out the company couldn't deliver, so I had to get my bank involved to reverse the cc charge; which is why I'm still in the market, looking to get some.

My primary interest has always been in the UVB, but since it didn't look like UVB diodes were ever going to be ready for "prime time", after years of waiting, I finally took the plunge for the UVA LED bloom boosters, which never arrived, sadly. 😔

My expectations from increased UVA in the final stretch was more resin production (not THC %); with better colour, smell & taste; and possibly greater resistance to PM & mold, though I think UVB is better for enhanced disease immunity.

Not all supplemental uv sources are equal. Some perform better than others, as the MIGRO review video demonstrates. UVA bars I would run for the full 12 hr day, daily for 3 weeks, for most strains; whereas UVB I would run only 2 hrs a day, from the first appearance of trichomes.

On the matter of UVB increasing potency, I would say, in theory, because I've never tried it, that the effect would be greater with some strains due to genetic memory; epigenetics as Musashi stated earlier in this thread. For example, equatorial varieties come from a place where UVB Light is far more intense than areas much further north or south. The memory of that is deeply embedded in them, so chances are excellent that they will express much better with supplemental UVB than a pure indica that originated a thousand miles north of the equator.
 
Cool. A few months ago I was considering buying an 8 bulb T5 fixture, until I found out EYE Hortilux closed up its North American operations. They had a bad-ass set of T5 Grow Bulbs that I wanted. Guess I should take a closer look at Sunblaster. Is that the best T5 full spectrum grow bulb out there atm? I need it/them for a special application.
yeah, as for whats on the market now, the sunblaster seems like its probably near the top. in person, you can definitely see that its a majority blue but does have some pink/red shades as well, pretty unique from a t5. Im also disappointed that the hortilux PowerVeg series is discontinued. I got to use them for a bit, and they were pretty great. The FS+UV bulb in that series was nearly identical to the reptisun, i had them side-by-side to compare. the 440 and 660 red were great as well

Ive only had the sunblasters a month or so though, so I cant say for sure if theyre any good long term. they may burn out quick or something, that remains to be seen

Hey Swifty, thanks for asking. My last 4 LEDs came with built-in UVA; and I've never used supplemental UVB, though I've been looking into it and wanting to try it for years. I've been holding out waiting for good UVB LED diodes to hit the market; while watching all these interesting bloom booster LED lights hit the market; but all still very costly still, so I've delayed longer than I wanted to, hoping for increasing competition to drive prices down.

As you may recall from a different thread, I finally took the plunge and bought a set last Dec. 2, only to find out the company couldn't deliver, so I had to get my bank involved to reverse the cc charge; which is why I'm still in the market, looking to get some.

My primary interest has always been in the UVB, but since it didn't look like UVB diodes were ever going to be ready for "prime time", after years of waiting, I finally took the plunge for the UVA LED bloom boosters, which never arrived, sadly. 😔

My expectations from increased UVA in the final stretch was more resin production (not THC %); with better colour, smell & taste; and possibly greater resistance to PM & mold, though I think UVB is better for enhanced disease immunity.

Not all supplemental uv sources are equal. Some perform better than others, as the MIGRO review video demonstrates. UVA bars I would run for the full 12 hr day, daily for 3 weeks, for most strains; whereas UVB I would run only 2 hrs a day, from the first appearance of trichomes.

On the matter of UVB increasing potency, I would say, in theory, because I've never tried it, that the effect would be greater with some strains due to genetic memory; epigenetics as Musashi stated earlier in this thread. For example, equatorial varieties come from a place where UVB Light is far more intense than areas much further north or south. The memory of that is deeply embedded in them, so chances are excellent that they will express much better with supplemental UVB than a pure indica that originated a thousand miles north of the equator.
very informed take here. its not all the THC increase, although I think there can be a small increase.

epigentics is very likely true, and it probably does vary by strain. From that perspective, all varieties remember what sunlight was like to some degree. and all sunlight has some amount of UVA and UVB in it (unless filtered like some greenhouses or whatever). My lighting goals have always been to create a broad spectrum, as sunlight is that. We cant compete with the sun indoors, but we can try. while photosynthesis peaks at certain wavelengths, it produces it with lower efficiency at all wavelengths... and photosynthesis isnt the only light reactive process happening in the plant.
 
If you were running your cmh in an open balast, then your plants were already getting extra UV. You might not notice as much of a difference adding extra UV, than you would if you had 't already been suplying some.
Hello Diesel,
I do run my CMH in an open reflector and CMH has indeed better blue spectrum than HPS (first reason I started with CMH!).
MH is even better in the blue spectrum, never ran that but I should have in the HPS days...
Valid point you make and that is also why I want to add extra UV in the shed shack.
CMH is in the middle and I want to try some extra UV on the sides.
Perhaps next year!
 
@Swifty So I started using those reptile bulbs when I was flowering with HPS. They made a noticeable improvement in resin production at that stage. What @Diesel840 is also true, if youre using a CMH in a reflector that does not have a glass shield, youre already getting some UV.

Heres my secret. I dont add UV lighting in flower typically, I let the CMH do its thing. I might sprinkle a few light sockets with y-adapters around the perimeter, so I can add a CFL + UVcfl around the perimeter if somewhere isnt getting lit well.....

..... but my veg lighting has UV added. I veg under 2 x 4ftx4bulb T5HO panels. so like 432w of t5HO. my spectrum per panel is 2x 6400k, 1x 2700k, 1x UV reptile bulb.

my reasoning is that THC is a terpenophenolic compound, so to maximize THC we need to maximize precursor chemicals. that process doesnt have to start in bloom. When I veg plants with UV lighting, I notice they smell stronger, sooner. stem rubs and all that.
Very interesting Amoril and it is logic what you say.
Thank you very much for sharing!😊
 
Hey Swifty, thanks for asking. My last 4 LEDs came with built-in UVA; and I've never used supplemental UVB, though I've been looking into it and wanting to try it for years. I've been holding out waiting for good UVB LED diodes to hit the market; while watching all these interesting bloom booster LED lights hit the market; but all still very costly still, so I've delayed longer than I wanted to, hoping for increasing competition to drive prices down.

As you may recall from a different thread, I finally took the plunge and bought a set last Dec. 2, only to find out the company couldn't deliver, so I had to get my bank involved to reverse the cc charge; which is why I'm still in the market, looking to get some.

My primary interest has always been in the UVB, but since it didn't look like UVB diodes were ever going to be ready for "prime time", after years of waiting, I finally took the plunge for the UVA LED bloom boosters, which never arrived, sadly. 😔

My expectations from increased UVA in the final stretch was more resin production (not THC %); with better colour, smell & taste; and possibly greater resistance to PM & mold, though I think UVB is better for enhanced disease immunity.

Not all supplemental uv sources are equal. Some perform better than others, as the MIGRO review video demonstrates. UVA bars I would run for the full 12 hr day, daily for 3 weeks, for most strains; whereas UVB I would run only 2 hrs a day, from the first appearance of trichomes.

On the matter of UVB increasing potency, I would say, in theory, because I've never tried it, that the effect would be greater with some strains due to genetic memory; epigenetics as Musashi stated earlier in this thread. For example, equatorial varieties come from a place where UVB Light is far more intense than areas much further north or south. The memory of that is deeply embedded in them, so chances are excellent that they will express much better with supplemental UVB than a pure indica that originated a thousand miles north of the equator.
Thank you FF!
You certainly peaked my interest and make valid points.
I feel that this is something that I should explore also.
I could buy a set of mars and run them on one side of the shed and just run cuts of one of my keepers.
That should give some more insight if this makes a noticeable difference.
 
epigentics is very likely true, and it probably does vary by strain.

I've seen it claimed (many times) that the resin spheres on a pure equatorial sativa are smaller than those on a pure indica hash-plant. Maybe R.C. Clarke observes this in 'Marijuana Botany'. Been a little while since I read it, so I'm not sure; but their size is relevant to the magnification of light in the chemical transformation of the resin.

We know this from using a basic magnifying glass. The smaller the light-sphere, or more concentrated the light-bead, projected by the glass, the more intense, hotter and brighter it is. The more combustible it is. The same rule must apply, in some way, to the light reaction inside the center of the resin sphere.

In an online article entitled 'Making a Water Magnifier', it's stated that "the water drop magnifies by a factor of 4 - 5. The smaller the droplet the more the magnification." ('Making a Water Magnifier' https://edu.rsc.org/resources/making-a-water-magnifier/1945.article#:~:text=You should find the water,to look through and focus. ) This is equally true of the trichome resin sphere: "The smaller" the sphere "the more the magnification" of the light that penetrates it.

In an online article entitled 'Electromagnetic Radiation', we read that "the higher the frequency, the higher the energy of the light. Light which has wavelengths of around 380 - 435 nm is seen as a sequence of violet colours. Various red colours have wavelengths around 625 - 740 nm. Which has the highest energy?

"The light with the highest energy will be the one with the highest frequency - that will be the one with the smallest wavelength. In other words, violet light at the 380 nm end of its range." (See Electromagnetic Radiation https://chem.libretexts.org/Bookshelves/Physical_and_Theoretical_Chemistry_Textbook_Maps/Supplemental_Modules_(Physical_and_Theoretical_Chemistry)/Spectroscopy/Electronic_Spectroscopy/Electronic_Spectroscopy_Basics/Electromagnetic_Radiation#:~:text=The frequency of light and its energy,-Each particular frequency&text=Various red colours have wavelengths,nm end of its range.)

So, UVB is a higher energy frequency than UVA. Bruce Bugbee says that, in terms of power, 1 uvb photon is equal to 100 uva photons. See the 4:50 point in 'How Ultraviolet Radiation Affects Plants'.

It's difficult for me to imagine that a greater magnification of UVB, by a smaller resin sphere, doesn't cause a more intense chemical reaction, at the center of it, that results in great potency; especially when epigenetics is factored in it.
 
yeah, as for whats on the market now, the sunblaster seems like its probably near the top. in person, you can definitely see that its a majority blue but does have some pink/red shades as well, pretty unique from a t5.

Thanks. Does Sunblaster have a T5 bloom tube? I'd would need that too.

Im also disappointed that the hortilux PowerVeg series is discontinued. I got to use them for a bit, and they were pretty great. The FS+UV bulb in that series was nearly identical to the reptisun, i had them side-by-side to compare. the 440 and 660 red were great as well

Yah, that Set was seriously bad-ass. You were fortunate to try it. I've had my eye on them for a few years. I would have got them sooner but too many higher priorities got in the way. It had to go on the back burner. Unfortunately I missed out. Oh well, maybe they'll resurface somehow, under a different brand name/label; or something close to it. Maybe Sunblaster should offer to take it off their hands.

Ive only had the sunblasters a month or so though, so I cant say for sure if theyre any good long term. they may burn out quick or something, that remains to be seen

How close can your plants get to them before they show any sign of stress?
 
I haven't pushed the distance yet. Right now they're 20ish inches from the tips, but its also young plants that are growing towards the light

I've only encountered the 6400k version, but on their website they have both a 2700k and a 10,000k ....the 10k might be interesting but I didn't see much info on it, and I haven't found anyone selling it

And yeah, it would be great if someone bought the Hortilux IP and started manufacturing a few of those things
 
All the LEDs with UVA and UVB are pretty expensive right now. To give it a try I'm thinking about a cheaper T5 UVA and UVB lamp like this (y)
It looks like a good start to me :unsure:

Some information to UV light from the book 'Cannabis Grower's Handbook' (Ed Rosenthal).
full

full


Let the light shine
MB
 
Last edited:
All the LEDs with UVA and UVB are pretty expensive right now. To give it a try I'm thinking about a cheaper T5 UVA and UVB lamp like this (y)
It looks like a good start to me :unsure:

PlantUV Spectrum

Screenshot_20250208_145503_Adobe Acrobat.jpg

MIGRO UVB310 Spectrum

Screenshot_20250208_145844_Chrome.jpg

Cali LightWorks Spectrum

Screenshot_20250208_145224_Chrome.jpg

If the above charts are accurate, then the CL emits the most UVB.

SolarSystem® UVB High Output T5 Fluorescent – California LightWorks

California LightWorks SolarSystem® UVB
 
Back
Top