For the first time for Real

Lu-Khan

Well-known member
Hello fellow growers ✌️
This grow will be special for me for several reasons. It will be the first time I grow regular seeds, the first time I grow such a large number of plants, the first time I make cuttings, and the first time I would like to select female plants with the aim of finding my first mother plant (or more?) that I would like to keep for some time. 🥳
I chose NL5xSkunk as my genetics, and I hope to find the taste, smell, and especially the effect that I remember from when I first started smoking. 😊
So what is the current situation in the tent:
I set myself the goal of examining the entire straw from each MNS cultivar. Well, there were 24 pieces in it 😁 Thank you @shantibaba. I put them in water for less than 24 hours and then straight into lightmix in a small propagator. Dear friends, even though I had to dig out one seed and turn it around when I saw that a root was sticking out of the soil instead of a sprout 😳, 24 beautiful little plants emerged from the soil and are alive 🤩. This is my first experience with MNS, and I must admit that I have been pleasantly surprised from the very beginning.
Today, I uncovered the propagator lid to allow air to flow and switched the light to 18/6 (during the first week before the plants emerge, I leave the light on 24/0).
The plan is to let them grow to a size where I can take two cuttings from each plant. After they take root, I will switch the plants to the flowering phase and remove the male plants.
The plants are currently in 0.3-liter pots. I want to repot them into 1-liter pots when necessary and then into the final 3.5-liter pots.
I will figure out all the details as I go along and learn as I go.
That's all for now, I will try to post updates as often as possible.
Any advice and comments are of course welcome.
Take care for now ✌️
 

Attachments

  • IMG_3595.jpeg
    IMG_3595.jpeg
    2.5 MB · Views: 14
  • IMG_3597.jpeg
    IMG_3597.jpeg
    1.8 MB · Views: 14
  • IMG_3621.jpeg
    IMG_3621.jpeg
    2.9 MB · Views: 14
Hello fellow growers ✌️
Just a quick update, all the little ones are doing well. Today, they got their first watering enriched with Canna Rhizotonic 4ml/1.5l. This is the first time I've used this product, so we'll see if I notice any difference. I don't normally use things like this, I bought it mainly for the planned cuttings.
I have already transplanted 4 plants into 0.7l pots because they were only in small seed trays.
The conditions in the tent are 20-25°C during the day and 17-20°C at night. I keep the RH around 60%, and the LED lighting is approximately 80w.
I will slowly start fertilizing with the next watering.

That's all for now 😊
Have a nice rest of the week ✌️
 

Attachments

  • IMG_3635.jpeg
    IMG_3635.jpeg
    2.8 MB · Views: 8
  • IMG_3636.jpeg
    IMG_3636.jpeg
    2.3 MB · Views: 8
  • IMG_3637.jpeg
    IMG_3637.jpeg
    1.9 MB · Views: 9
Hello everyone 😊
The plants have grown nicely over the past week. I still have most of them in small pots (0.35 l), but the roots are still not coming out from the bottom. I'm glad because I want to keep them small for as long as possible, but on the other hand, I'm getting tired of them drying out so quickly 😅
I'll probably repot them into 0.7 l pots this weekend.
I have started to slowly fertilize them.
I always do this by maintaining the ratio specified by the manufacturer and adding the fertilizer drop by drop, which allows me to start fertilizing very carefully.
The light is still at approximately 80W, 30-40 cm away from the tops of the plants. Temperatures are 21-25°C during the day and 17-20°C at night, with humidity ranging from 50-60%.
The water has a pH of 6.5, so I add 3 components of Jungleindabox and Canna Rhizotonic fertilizer.
With a few exceptions, the flowers are almost identical in size 🤩
Can anyone give me an idea of what phenotypes I can expect? Is it possible to find something more sativa?
Have a great rest of the week, friends, I hope you are all doing well. 😊 ✌️
 

Attachments

  • IMG_3660.jpeg
    IMG_3660.jpeg
    2.1 MB · Views: 7
  • IMG_3659.jpeg
    IMG_3659.jpeg
    2.8 MB · Views: 7
  • IMG_3658.jpeg
    IMG_3658.jpeg
    2.2 MB · Views: 8
  • IMG_3657.jpeg
    IMG_3657.jpeg
    2.3 MB · Views: 6
  • IMG_3652.jpeg
    IMG_3652.jpeg
    2 MB · Views: 7
  • IMG_3651.jpeg
    IMG_3651.jpeg
    1.9 MB · Views: 5
Beautiful seedlings mate, very uniform in height already!

I'm seeing a few different phenotypes and morphologies so you may be lucky and get one that is more sativa leaning although, the strain is mainly indica. It's a great strain though, one of my favourites!
Hello everyone 😊
The plants have grown nicely over the past week. I still have most of them in small pots (0.35 l), but the roots are still not coming out from the bottom. I'm glad because I want to keep them small for as long as possible, but on the other hand, I'm getting tired of them drying out so quickly 😅
I'll probably repot them into 0.7 l pots this weekend.
I have started to slowly fertilize them.
I always do this by maintaining the ratio specified by the manufacturer and adding the fertilizer drop by drop, which allows me to start fertilizing very carefully.
The light is still at approximately 80W, 30-40 cm away from the tops of the plants. Temperatures are 21-25°C during the day and 17-20°C at night, with humidity ranging from 50-60%.
The water has a pH of 6.5, so I add 3 components of Jungleindabox and Canna Rhizotonic fertilizer.
With a few exceptions, the flowers are almost identical in size 🤩
Can anyone give me an idea of what phenotypes I can expect? Is it possible to find something more sativa?
Have a great rest of the week, friends, I hope you are all doing well. 😊 ✌️
 
Hello colleagues 😊
So, on Sunday, I repotted 20 skunks into new 0.7-liter pots. The root ball was so developed in most of them that I think I will be repotting them into their final pots in a week 😅💪
When repotting, I use powdered mycorrhizal fungi and Cannacure spray. 💦
I watered them with fertilizer using the bottom watering method (I poured water into the saucers).
Yesterday, I went to check on the plants, and they seem to be happy in their new home 😊
The temperatures are 22-26°C during the day and 17-19°C at night, with humidity ranging from 50-60%. I can't do any more than that at this time of year 😁
Overall, I am thrilled with this round, and I am very pleased with the morphology and health of the plants 🤩
Although I must admit that I am getting a little nervous as the cutting season approaches 😳😁

Have a great day 😊 ✌️
Lu-Khan
 

Attachments

  • IMG_3668.jpeg
    IMG_3668.jpeg
    2.2 MB · Views: 12
  • IMG_3669.jpeg
    IMG_3669.jpeg
    2.4 MB · Views: 12
  • IMG_3670.jpeg
    IMG_3670.jpeg
    2.2 MB · Views: 12
  • IMG_3671.jpeg
    IMG_3671.jpeg
    2.7 MB · Views: 12
  • IMG_3672.jpeg
    IMG_3672.jpeg
    2.7 MB · Views: 10
  • IMG_3673.jpeg
    IMG_3673.jpeg
    2.4 MB · Views: 12
Hello colleagues 😊

Yesterday, I topped all the plants. I had already pruned the lower level, so now I have 6 branches left on each plant. The 2 lower branches will be used for clones, so the plan is that each plant will ultimately have 4 main branches.

After topping, I watered the plants with clean water with a pH of 6.2 and sprayed them with Cannacure.

When checking the bottom of the pots, I saw that the plants are already fully rooted, so now I will wait 2-3 days and transplant them into their final 3.5-liter pots.

Humidity and temperatures remain unchanged.

They are starting to smell, and when I enter the room, I can smell the (for me) typical heavy scent of Afghan/Kush.

As you can see in the photos, I am happy that everything is going smoothly 🤩

I am really looking forward to my Skunks.😁

Have a great and happy week ✌️
 

Attachments

  • IMG_3681.jpeg
    IMG_3681.jpeg
    2.6 MB · Views: 7
  • IMG_3694.jpeg
    IMG_3694.jpeg
    2.6 MB · Views: 6
  • IMG_3695.jpeg
    IMG_3695.jpeg
    2.6 MB · Views: 6
  • IMG_3696.jpeg
    IMG_3696.jpeg
    2.6 MB · Views: 6
  • IMG_3697.jpeg
    IMG_3697.jpeg
    2.6 MB · Views: 7
Hello fellow growers ✌️

I transplanted all the Polar Skunks into their final 3.5-liter pots filled with a mixture of light mix and perlite. I have to admit that I overdid it 😅

I would say that 18 would have been a much better number, but that's experience for me 😊

But as you can see in the photos, all the crew members are doing great. The four that have been a little ahead from the start (larger pots) are already ready for cloning. I'll wait 3-4 days for the rest to develop and then start cloning them all.

I can see clear differences in the shapes of the leaves, narrower and serrated ones, which I think I know from skunk hybrids, and thick, wide leaves, which I have never grown before. I guess that's a sign of NL5.

It has cooled down a bit, so the average temperature in the tent has dropped by 2°C. I fertilize every third watering. In addition to the fertilizers I use, I added Biobizz calmag 0.5ml/l as a preventive measure.

I don't know if it's a sign of the variety or Rhizotonic, but after transplanting, the roots absolutely exploded. Three days after transplanting, large, healthy white roots are coming out of all the pots. I'm not used to growing in such small pots, but hopefully the plants will manage and won't suffer too much from the lack of space in the root zone.

I think that in a week I could switch to flowering and start determining the sex of the plants 🤩

Have a great week, brothers ✌️
 

Attachments

  • IMG_3700.jpeg
    IMG_3700.jpeg
    3.3 MB · Views: 12
  • IMG_3702.jpeg
    IMG_3702.jpeg
    3.4 MB · Views: 9
  • IMG_3703.jpeg
    IMG_3703.jpeg
    3.1 MB · Views: 11
  • IMG_3712.jpeg
    IMG_3712.jpeg
    3.4 MB · Views: 12
Hello fellow growers ✌️

I transplanted all the Polar Skunks into their final 3.5-liter pots filled with a mixture of light mix and perlite. I have to admit that I overdid it 😅

I would say that 18 would have been a much better number, but that's experience for me 😊

But as you can see in the photos, all the crew members are doing great. The four that have been a little ahead from the start (larger pots) are already ready for cloning. I'll wait 3-4 days for the rest to develop and then start cloning them all.

I can see clear differences in the shapes of the leaves, narrower and serrated ones, which I think I know from skunk hybrids, and thick, wide leaves, which I have never grown before. I guess that's a sign of NL5.

It has cooled down a bit, so the average temperature in the tent has dropped by 2°C. I fertilize every third watering. In addition to the fertilizers I use, I added Biobizz calmag 0.5ml/l as a preventive measure.

I don't know if it's a sign of the variety or Rhizotonic, but after transplanting, the roots absolutely exploded. Three days after transplanting, large, healthy white roots are coming out of all the pots. I'm not used to growing in such small pots, but hopefully the plants will manage and won't suffer too much from the lack of space in the root zone.

I think that in a week I could switch to flowering and start determining the sex of the plants 🤩

Have a great week, brothers ✌️
Nice polar strawberries over there :)
 
I don't know if it's a sign of the variety or Rhizotonic, but after transplanting, the roots absolutely exploded. Three days after transplanting, large, healthy white roots are coming out of all the pots
Hey and one Love @Lu-Khan,

first of all very impressive Start of your Grow. You did a great choice with the NL#5xSk#1. That will be a Killer Grow, Bro 😃.

I have the Same experience with Canna Rhizotonic, If the Roots been there, Dis stuff multiply the new developing massive. But it is for sure also a sign for a very good genetic (or Vice versa)... But i don't go with the Numbers on the bottle, i take Most of the Time only the half or two third, of what Canna recommend . But it works amazing, I use it ever since.

One Love Penny
 
Last edited:
Hi @Ptree ,

Yeah, you're right, especially the broad-leaved ones really resemble strawberry plants 😁🍓

Hi @PennyP
Thanks for stopping by 😊
Yes, I also think I made a great choice. The plants are tame, predictable, undemanding, and respond well to my growing environment.🪴

And I hope it will be awesome 😆 I was very excited by the photo of NL5xSk that you recently shared in another thread 🤩🤤
 
Hello friends 😊

All the skunks were cut and trimmed. I was very naive when I thought I would take two cuttings from each plant. I took two cuttings from the first six, but when I looked at my 30x60cm propagator, I decided it would be better to take one from each 😅

However, while cutting, I found a few thin-leaved ones that I decided to double.

Once the initial beginner's stress left me, I started to really enjoy cloning 😁

I work in a very cramped space, so it is sometimes difficult to enjoy more extensive manipulation and operations with plants. When I grow up, I will grow in rooms after children like @Skuncle Lenny 😁✌️

Another benefit was that I had the opportunity to examine each plant closely. I must say that there will be plenty to choose from, as I found something "extra" in most of them 🤩

I'll wait a few days for the ladies to recover from the amputation of their limbs and then start reducing the number of hours of lighting. I know it would be ideal to wait for the clones to take root, but I think my main tent would be overgrown by then, which is another reason to choose a lower number of plants next time 💡

Have a great week full of peace, brothers 😊✌️
 

Attachments

  • IMG_3715.jpeg
    IMG_3715.jpeg
    3.3 MB · Views: 9
  • IMG_3719.jpeg
    IMG_3719.jpeg
    3.6 MB · Views: 8
  • IMG_3720.jpeg
    IMG_3720.jpeg
    3.4 MB · Views: 8
  • IMG_3721.jpeg
    IMG_3721.jpeg
    3.3 MB · Views: 9
Back
Top