LED tutorial forum

PlantUV Spectrum
View attachment 97402

MIGRO UVB310 Spectrum

View attachment 97403

Cali LightWorks Spectrum

View attachment 97404

If the above charts are accurate, then the CL emits the most UVB.

SolarSystem® UVB High Output T5 Fluorescent – California LightWorks

California LightWorks SolarSystem® UVB
its hard to tell since they arbitrarily scale these graphs, but IMO the MiGRO seems to be a very similar spectrum to the CL. Both are good finds!
 
IMO the MiGRO seems to be a very similar spectrum to the CL. Both are good finds!

Yes, Amoril, on second thought, I have to agree with you. After taking a closer second look at the MIGRO graph, I noticed that I misread the 300 nm line location, which slanted my view. Good catch on that. Both will perform well, for sure.

Screenshot_20250208_193457_Samsung Internet.jpg
 
Some information to UV light from the book 'Cannabis Grower's Handbook' (Ed Rosenthal).

Hey @Mr. Brown, thanks for taking the time to share those page photos. Much appreciated, my man. That triggered me into thinking 🤔 about harvesting this summer during peak UVB days. The last threat of frost here is on 4/20, literally. If I put out large fully vegged plants on 4/20 and light dep them, starting on 4/20, I could harvest them between July 1 - July 4. That would be 72-75 days of bloom. July 1 is officially Canada Day here. I would initiate harvest on Canada Day and complete it on Independence Day. Some food for thought... 🤔

Let the light shine

A very creative thought, Mr. Brown. May we harmonize with the light; and allow it to shine through our crop & cultivation practice. As within so without. 😔🙏🏻

Cheers, bro'! 🤞🏻😎👍🏻
 
Very interesting discussion here imo.

I have done many forced flowerings of seed plants and cuts myself outdoors and I did not notice any significantly better potency in these plants.
They are definitely far superior in yield vs. plants that are naturaly triggered into flowering.
Terps can be lesser if it is very hot at the end of flowering and my personal experience says that I prefer harvesting more at the end of august.
Quality and yield are best for me in that period.

Some elemements that also matter imo:

-Position of the sun is different at peak season, sun rays hits the buds at a different angle vs. fall.
-Amoril brought something interesting up: the amount of UV during the entire lifecycle (and perhaps even more so in veg) of the plant is more important than during flowering alone.
my reasoning is that THC is a terpenophenolic compound, so to maximize THC we need to maximize precursor chemicals. that process doesnt have to start in bloom. When I veg plants with UV lighting, I notice they smell stronger, sooner. stem rubs and all that.
 
Very interesting discussion here imo.

I have done many forced flowerings of seed plants and cuts myself outdoors and I did not notice any significantly better potency in these plants.

That's a very interesting observation, Swifty. It's good to know. Thanks for mentioning it.

May I ask what latitude you're at? And what kind of average UVB level / number you get there, in your zone, throughout July?

They are definitely far superior in yield vs. plants that are naturaly triggered into flowering.

That alone is reason enough for me to try it, I think. Harvesting on July 1 would also leave me enough season for a second crop, which would be really cool. New transplants on July 1 would still have 2-3 weeks of veg time before they start to bloom.

Terps can be lesser if it is very hot at the end of flowering and my personal experience says that I prefer harvesting more at the end of august.

Quality and yield are best for me in that period.

Great point, Swifty. Harvesting crop 'A' on August 1 still leaves enough season here for a second crop. If I wanted to run autos, though, for a second crop, it would be better to plant the seed to sprout by July 1, for the longer day cycle during veg time.

Your point, about the effect of high temps on the terps is well received, though. It's a proper point of concern. We don't get many June days above 85° F (29.4° C) here. The real hot days here are in July. I would harvest as early in the cool morning as possible.

The book page posted by Mr. Brown says UVB in San Francisco peaks at around a level 9; but here it peaks at about 6, and rarely ever exceeds that.

Some elemements that also matter imo:

-Position of the sun is different at peak season, sun rays hits the buds at a different angle vs. fall.
-Amoril brought something interesting up: the amount of UV during the entire lifecycle (and perhaps even more so in veg) of the plant is more important than during flowering alone.

All great points for sure, Swifty, and worthy of discussion. Thank you.

As for indoor supplemental UVB, it is known that too much can slow a plant's vegetative growth & reduce its yield; so I'd be reluctant to give more UVB during the veg phase than the bloom phase, but it would certainly make an interesting lab experiment, in a tightly controlled A vs. B grow-off test run.

As part of that experiment, I could see giving small doses of UVB during the veg cycle, such as 15 minutes twice a day during the seedling stage; later increasing it to 30 minutes twice a day until the first sign of trichomes, then increasing it one last time again to 60 minutes twice a day for the duration.

Possibly increasing it to 90 minutes twice a day in the final week, or just in the last few days. Some dialing in or fine tuning is to be expected, to find the best SOP.
 
Last edited:
As for indoor supplemental UVB, it is known that too much can slow a plant's vegetative growth & reduce its yield; so I'd be reluctant to give more UVB during the veg phase than the bloom phase, but it would certainly make an interesting lab experiment, in a tightly controlled A vs. B grow-off test run.

As part of that experiment, I could see giving small doses of UVB during the veg cycle, such as 15 minutes twice a day during the seedling stage; later increasing it to 30 minutes twice a day until the first sign of trichomes, then increasing it one last time again to 60 minutes twice a day for the duration.

Possibly increasing it to 90 minutes twice a day in the final week, or just in the last few days. Some dialing in or fine tuning is to be expected, to find the best SOP.
when I first started using UVB years ago, I did this. Had them on separate timers, only came on for maybe 2hrs in the middle of the light cycle during bloom. Honestly didnt perceive a change, maybe slightly more resinous, but not drastically so. Probably just my bias wanting it to be better. Then I started vegging with them, again on separate timers and maybe on for 45 minutes twice per light cycle. again, noticed very little impact.... but also didnt notice the plants responding negatively.

Eventually, i stopped using the separate timers, and had UV on during grow and bloom light cycles. This is when I noticed things being more fragrant. Now my veg UV lights are integrated into my t5 panels, theyre on if lights are on. It was noticeable enough that I was able to get my grow partners to invest in nearly 60 zoo-med reptisun bulbs to add into our veg lighting in the clone room, before they went to the greenhouse. Some strains saw almost a 1% overall increase in terps. (from 2.5 to 3.5 is huge, for example)

I think its probably relevant to how intense the UV light is / how much UV is being produced, and how close the light source is to the canopy. I have not tested shorter bursts of more intense / closer light..... though at one point, years ago using CFLs, I did have the Reptisun maybe 2 or 3 inches from plants without any ill effects

Your mileage may vary, but thats been mine.
 
That's a very interesting observation, Swifty. It's good to know. Thanks for mentioning it.

May I ask what latitude you're at? And what kind of average UVB level / number you get there, in your zone, throughout July?



That alone is reason enough for me to try it, I think. Harvesting on July 1 would also leave me enough season for a second crop, which would be really cool. New transplants on July 1 would still have 2-3 weeks of veg time before they start to bloom.



Great point, Swifty. Harvesting crop 'A' on August 1 still leaves enough season here for a second crop. If I wanted to run autos, though, for a second crop, it would be better to plant the seed to sprout by July 1, for the longer day cycle during veg time.

Your point, about the effect of high temps on the terps is well received, though. It's a proper point of concern. We don't get many June days above 85° F (29.4° C) here. The real hot days here are in July. I would harvest as early in the cool morning as possible.

The book page posted by Mr. Brown says UVB in San Francisco peaks at around a level 9; but here it peaks at about 6, and rarely ever exceeds that.



All great points for sure, Swifty, and worthy of discussion. Thank you.

As for indoor supplemental UVB, it is known that too much can slow a plant's vegetative growth & reduce its yield; so I'd be reluctant to give more UVB during the veg phase than the bloom phase, but it would certainly make an interesting lab experiment, in a tightly controlled A vs. B grow-off test run.

As part of that experiment, I could see giving small doses of UVB during the veg cycle, such as 15 minutes twice a day during the seedling stage; later increasing it to 30 minutes twice a day until the first sign of trichomes, then increasing it one last time again to 60 minutes twice a day for the duration.

Possibly increasing it to 90 minutes twice a day in the final week, or just in the last few days. Some dialing in or fine tuning is to be expected, to find the best SOP.
I'm at 50°N FF and should be at 7-8.
Ofcourse results must vary from region to region.

when I first started using UVB years ago, I did this. Had them on separate timers, only came on for maybe 2hrs in the middle of the light cycle during bloom. Honestly didnt perceive a change, maybe slightly more resinous, but not drastically so. Probably just my bias wanting it to be better. Then I started vegging with them, again on separate timers and maybe on for 45 minutes twice per light cycle. again, noticed very little impact.... but also didnt notice the plants responding negatively.

Eventually, i stopped using the separate timers, and had UV on during grow and bloom light cycles. This is when I noticed things being more fragrant. Now my veg UV lights are integrated into my t5 panels, theyre on if lights are on. It was noticeable enough that I was able to get my grow partners to invest in nearly 60 zoo-med reptisun bulbs to add into our veg lighting in the clone room, before they went to the greenhouse. Some strains saw almost a 1% overall increase in terps. (from 2.5 to 3.5 is huge, for example)

I think its probably relevant to how intense the UV light is / how much UV is being produced, and how close the light source is to the canopy. I have not tested shorter bursts of more intense / closer light..... though at one point, years ago using CFLs, I did have the Reptisun maybe 2 or 3 inches from plants without any ill effects

Your mileage may vary, but thats been mine.

Thank you Freedom_Fighter and Amoril for sharing your experiences, insights and knowledge, this is certainly very interesting and food for further thought.:)
 
Just came back to the MNS forum to do more research on Nevil and saw your post Freedom_Fighter.

mu, the next time you communicate with SB, tell him I will be _forever_ indebted to him for keeping most of Nevil' s posts alive, _15_ years down range. ✌️❤️

F_F, Here's a cut and paste from the other forum:

-------------------------------------------------------

Mar 6, 2024
Add bookmark
I've been following the LED and Bud Quality thread for a while now and even an old geezer like me can't believe growers are still debating this topic. With various participants slamming their dicks/clits down, saying either LEDs suck or they're the best, I thought it might be a good idea to see just what various growers have used in the past, what you're using now, and what you think your next light will be.

My first grow light was a 4 ft Gro-Lux fluorescent tube fixture, bought in 1979. The seedlings are from the occasional seeds I would get from Jamaican sinse, smuggled into the U.S. for the Zion Coptic Church. Never got 'em to flower, not enough juice with with fluorescent and I was scoring great bags at cost, so the grow was based more on curiosity than need:

first_growroom (1).jpg

Photo developed in Miami at Fotomat, when the War on Drugs didn't include cannabis. :eek:

Moved to the mountains, started gorilla growing outside, got divorced/vindictive wife, so had to move inside. Bought this light in 1987, for a 5 by 2 grow closet. A 1 KW MH from Midwest Supplies out of Ann Arbor, from a High Times ad. Big fucking mistake, read about Operation Green Merchant. One of the few companies that didn't rat out their customers. I could debate MH vs. HPS with anyone, for my situation. I tamed those Jamaican Type I/Type II hybrids with this monster:

kw_mh.jpg

Obviously, heat, humidity and airflow were a challenge in a 10 sq. ft closest but after a bunch of fuckups when I first began, I started hitting my groove. Power bills, specifically paying them, could be a problem so when LEDs first appeared, I was intrigued and investigated. Got this light, a G8LED (140 watts at the wall) for $320 USD in 2013 and utilized another closet to start seedlings for a proof of concept, to see if it would work in my situation. For seedlings and early vegging, it was great:

PXL_20240122_192307564.jpg

I never bought into the "replaces a 400w HPS" hype but the seedlings thrived, so I decided to go all in. Decided to use the G8LED for spouts and seedlings in a small closet and use two of these in the 2 x 5 closet:

PXL_20240122_192443103.jpg

So I replaced a 1 kW MH with 750 watts of _adjustable_ LEDs, in the same space, for $1.5k USD! Bought it direct, so don't know the exact date purchased but I remember the price, 'cause had to scrimp, sacrifice and save just to purchase them. Originally, thought I'd hit the plants with heavy blue during veg and heavy red during flowering. Too long a story for now but turned out plants did best when hit with full burple lighting _all_ the time, rather than reduced blue or red for specific growth phases. Imagine that. :rolleyes:

Due to the political situation here in the U.S., my wife and I's cannabis consumption dramatically increased, necessitating the need for a tent in the basement. Couldn't afford more LumiGrows but KingPlus blurples, with "new" improved 10w LED chips, were affordable. So got a pair of these, KingPlus "1800 watt" 340 actual watts lights, $239 USD in 2017:


PXL_20240122_192831268.jpg

They were decent lights but not terribly reliable. Learned to replace the PCBs myself... that they sent me a couple of times under warranty. :confused:

Was overall fairly happy but when one of 'em totally crapped out, decided to go back to a U.S. manufacturer and got this, the only "bloom booster" that actually works :p:



PXL_20240122_192924224.jpg

Can't remember how much it was but it was expensive, compared to other, lesser quality lights made in China. That light is built like a fucking tank, leans heavy red and still works fine even now, many years later. I don't use it anymore because the electricity use bang per buck just isn't there.

Political situation got worse and needed a bigger tent, so got an 8 x 4 to go with the 4 x 4 in the basement. Went with 2 SF2000 SMB lights, $320 USD a piece in 2020, for the 4 x 4 and 2 SF4000 lights at $600 a piece for the 8 x 4.

8X4_fans.jpg

4 x 4 tent started deteriorating, so upgraded to a 5 x 5 tent and added a SF2000 Pro for $220 last year, definitely one I shouldn't have ordered because they no longer use Meanwell drivers.

out_of_the_closet.jpg


The closet lights had some years on them, so last year decided to upgrade with this for the original closet, a ViparSpectra XS4000, for $320:

DSCN0982.JPG

Would I make different choices now? Without a doubt. But right now all of the current lights are humming along, doing their thing, using just a bit more energy than the original 1 kW MH.

---------------------------------------

I'll answer any questions you may have F_F. Or anyone else for that matter, as long as you're not disrespectful.;)
 
Last edited:
Just came back to the MNS forum to do more research on Nevil and saw your post Freedom_Fighter.

mu, the next time you communicate with SB, tell him I will be _forever_ indebted to him for keeping most of Nevil' s posts alive, _15_ years down range. ✌️❤️

Thanks for this interesting post, @charlesufarley; and like yourself, I'm grateful to Shantibaba as well, for preserving most of "Nevil's posts". It would be a damn shame, for a variety of reasons, to lose access to those; for sure.

F_F, Here's a cut and paste from the other forum:

-------------------------------------------------------

Mar 6, 2024
Add bookmark
I've been following the LED and Bud Quality thread for a while now and even an old geezer like me can't believe growers are still debating this topic. With various participants ... saying either LEDs suck or they're the best, I thought it might be a good idea to see just what various growers have used in the past, what you're using now, and what you think your next light will be.

My first LED was purchased a couple decades ago, strictly for seedlings. I still have it and will post a photo of it someday, when it's convenient to do so; but in hindsight I regret buying it and paid way too much for it; but I was ignorant at the time and too gullible, and there was a great lack of useful info and product reviews back then, to help guide my decision making.

My first grow light was a 4 ft Gro-Lux fluorescent tube fixture, bought in 1979.

My first grow light / fixture was also fluorescent, back in 1980. Unfortunately I didn't take photos of it, but I acquired six 'used' 4 ft long double tube fixtures, disassembled and transferred all the parts from those fixtures onto a single wooden panel; and had a licensed electrician friend check it over & properly ground it for me. There was nothing similar to that design that I was aware of, back then. I was using 12 of the best Gro-Lux grow bulbs available at the time, in that "set-up".

The seedlings are from the occasional seeds I would get from Jamaican sinse, smuggled into the U.S. for the Zion Coptic Church. Never got 'em to flower, not enough juice with with fluorescent

Back then, I was growing Columbian Gold under that light panel and getting it to finish. Although the buds and yield were small, the quality was surprisingly quite good.

Got this light, a G8LED (140 watts at the wall) for $320 USD in 2013 and utilized another closet to start seedlings for a proof of concept, to see if it would work in my situation. For seedlings and early vegging, it was great:

I was looking at the G8LED as well, back then, but never "took the plunge," as they say; though it had good reviews and was clearly superior to the LED I had, att, which was "primitive" by comparison.

I never bought into the "replaces a 400w HPS" hype but the seedlings thrived, so I decided to go all in. Decided to use the G8LED for spouts and seedlings in a small closet and use two of these in the 2 x 5 closet:

View attachment 97715

So I replaced a 1 kW MH with 750 watts of _adjustable_ LEDs, in the same space, for $1.5k USD! Bought it direct, so don't know the exact date purchased but I remember the price, 'cause had to scrimp, sacrifice and save just to purchase them.

I don't recall being aware of the LumiGrow brand back then, but wow, it was clearly ahead of the curve with 3 way spectrum control. There was a brand that I was highly infatuated with, att, called PlatinumLED, which had 2 models: 1.) 'Advanced', and 2.) The 'XML2' with 3 way spectrum control. Their price kept me from taking the plunge into that as well.

I ended up buying a cheap Chinese knock-off of it instead; but without the spectrum control. No photos of it currently, that I can upload, but I still have it, so I'll take some photos later, when it's convenient.

Went through a major move back in '23, so my basement is still a major disorganized disaster zone. Moving was a major source of 'burn-out' for me, and I'm still sorting through "stuff" and not fully settled in yet; partially because I wasn't sure how long I'd be staying in this current place, so I didn't want to unpack everything if I was going to end up moving again in a couple years.

Originally, thought I'd hit the plants with heavy blue during veg and heavy red during flowering. Too long a story for now but turned out plants did best when hit with full burple lighting _all_ the time, rather than reduced blue or red for specific growth phases. Imagine that. :rolleyes:

So, you're not a fan of 3 way spectrum control? 😲 Wow! Some interesting food for thought.

Due to the political situation here in the U.S., my wife and I's cannabis consumption dramatically increased, necessitating the need for a tent in the basement. Couldn't afford more LumiGrows but KingPlus blurples, with "new" improved 10w LED chips, were affordable. So got a pair of these, KingPlus "1800 watt" 340 actual watts lights, $239 USD in 2017:

View attachment 97716

They were decent lights but not terribly reliable. Learned to replace the PCBs myself... that they sent me a couple of times under warranty. :confused:

King Plus is another brand I was looking into as well, back then; but never took the plunge. The brand I finally picked up, alluded to above, is called the BOSS GoldenRing. I got 3 of them; 2 of which are 153 actual watts, and the third is about 230 actual watts.

The 153w was actually sold as being equivalent to 840w, in terms of their PPFD output; and the 230w model was claimed to be equivalent to 1260w, on the basis of its PPFD measurement(s). They're 'blurple' lights. You can srill see them online here:

GoldenRing S4 840W Double 5W Chips, Full Spectrum LED Grow Light

That same website still shows the PlatinumLED XML2 Series, which the BOSS GoldenRing was based on.

Was overall fairly happy but when one of 'em totally crapped out, decided to go back to a U.S. manufacturer and got this, the only "bloom booster" that actually works :p:


View attachment 97717

Can't remember how much it was but it was expensive, compared to other, lesser quality lights made in China. That light is built like a fucking tank, leans heavy red and still works fine even now, many years later. I don't use it anymore because the electricity use bang per buck just isn't there.

That CL SolarFlare 220 does look like a solid build. Pretty interesting. I'm impressed with their current UV-B lights. Think I'll be getting a couple soon.

Political situation got worse and needed a bigger tent, so got an 8 x 4 to go with the 4 x 4 in the basement. Went with 2 SF2000 SMB lights, $320 USD a piece in 2020, for the 4 x 4 and 2 SF4000 lights at $600 a piece for the 8 x 4.

View attachment 97718

4 x 4 tent started deteriorating, so upgraded to a 5 x 5 tent and added a SF2000 Pro for $220 last year, definitely one I shouldn't have ordered because they no longer use Meanwell drivers.

View attachment 97719

The closet lights had some years on them, so last year decided to upgrade with this for the original closet, a ViparSpectra XS4000, for $320:

View attachment 97720

Would I make different choices now? Without a doubt. But right now all of the current lights are humming along, doing their thing, using just a bit more energy than the original 1 kW MH.

In 2017, I picked up something called the PerfectSun Max Yield. No photos currently to share, but I still own it, so can take some later, when it's convenient; but it can be seen in this video:

PerfectSun Max Yield LED in Action

After that I switched over to the Optic LED brand, which is going through some serious issues at the moment. It's looking like it may go out of business soon, if it hasn't already; although their website store is still up and taking orders. Not sure if I'll ever buy another LED grow-light again, as I have enough of them to last the rest of my life; but I would definitely get a 'Sun On Demand' plasma grow light, if an affordable 600w version of it ever hit the market.
 
Last edited:
There was a brand that I was highly infatuated with, att, called PlatinumLED, which had 2 models: 1.) 'Advanced', and 2.) The 'XML2' with 3 way spectrum control. Their price kept me from taking the plunge into that as well.
My first light I ever bought, was an Advanced Platinum LED. Their advertising sure was great! Too bad the light didn't live up to my exspectation. Tbh, the light had been out for years before I bought it. In fact, I'd had the light for years before I ever even opened the box, let alone grew something with it 😅. I still use her as an extra light.
 
Last edited:
The brand I finally picked up, alluded to above, is called the BOSS GoldenRing. I got 3 of them; 2 of which are 153 actual watts, and the third is about 230 actual watts.

The 153w was actually sold as being equivalent to 840w, in terms of their PPFD output; and the 230w model was claimed to be equivalent to 1260w, on the basis of its PPFD measurement(s).

The following PlatinumLED video demonstrates the point that actual wattage draw does not equal final output power. Some lights actually use more wattage while outputting far less PAR, than the PlatinumLED. In this case, the Mars Hydro2 700w model is shown to draw 37w more than the P450, for a PAR output that is almost 50% less.

PlatinumLED Grow Lights P450w vs Mars Hydro 700w - PAR Test and Comparison HD

PlatinumLED attributes this superior PAR output to its secondary lense(s). Mars Hydro responded to the above review video with its own review video of PlatinumLED; exposing it to be basically a rebranded E-Shine LED with a slightly improved spectrum and a 5 Year Warranty, compared to the E-Shine 3 Year Warranty.

Platinum LED versus Eshine LED || Mars Hydro

While this is an interesting review video by MH, it isn't a great one because it fails to actually test & compare the 2 spectrums, with a spectrometer; nor does it perform a PAR test comparison.

While I don't know this for a fact, I suspect the reason they skipped the PAR test was probably because the PlatinumLED PAR was superior. As for the spectrum, you can see it stated on the E-Shine that it's an 11 band spectrum, whereas the PlatinumLED is a 12 Band.

So, that PlatinumLED was nearly double the cost of the E-Shine, due to a proprietary 12 band spectrum, a proprietary secondary lense and 2 year better warranty. The great irony regarding that, of course, is that it was poor customer service and failure to honor their warranties, that finally destroyed the PlatinumLED brand. What a shame, tbh. A similar scenario is playing out with Optic LED, currently.

The PlatinumLED P450 actual power draw was 253w, compared to 290w by the MH2. The center PAR readings were 707 micromole for the MH, at 18", compared to 1340 micromole for PlatinumLED. The PlatinumLED had 150 × 3w diodes, hence the 450 designation in the name; while the MH2 had 140 × 5w diodes, hence the 700w designation.

One other thing I'd like to mention here, in passing, is that the PAR magnification effect of PlatinumLED's secondary lense demonstrates, in a sense, the magnification effect of smaller resin spheres compared to larger ones.
 
Last edited:
Terps can be lesser if it is very hot at the end of flowering and my personal experience says that I prefer harvesting more at the end of august.
Quality and yield are best for me in that period.

Hey @Swifty, as I was thinking more about your observations here, it occurred to me that when you asked me last summer, in mid October, to describe the smell(s) of the G13 Haze, I replied by saying they were subtle at best; or subdued by comparison to the way they smelled just a month earlier, in mid September; which correlates with what you were saying about how your plants tend to smell around the end of August.

At the time, I was thinking that the lack of smell, from organically grown plants, might be due to their IBL status; and possibly the cooler October temps. It didn't occur to me, at the time, that the October light spectrum may have played a role as well. Then MIGRO Shane dropped this next video, which got me to think again:

Is far red good for yield and potency? || MIGRO Shane

According to the published studies mentioned by Shane, too much far red light has a negative effect on terps; and according to Google, far red light increases dramatically in the fall and winter months, peaking in December at this latitude:

Screenshot_20250226_113040_Chrome.jpg

So, assuming those studies are correct, which Shane discusses in that video, it's better to harvest when the far red light is minimal.

Some elemements that also matter imo:

-Position of the sun is different at peak season, sun rays hits the buds at a different angle vs. fall.
-Amoril brought something interesting up: the amount of UV during the entire lifecycle (and perhaps even more so in veg) of the plant is more important than during flowering alone.

To your point about the UVB Light effect on terp development during the veg phase, I will need to provide supplemental indoor UVB to the plants that will be moved outdoors in April; if I follow through with that plan. Not sure if I'll have those UVB tubes in time to do that this season, so I'll limit that experiment to a single plant, this year.

Screenshot_20250227_065746_Chrome.jpg

Cheers! 😎👍🏻
 

Attachments

  • Screenshot_20250226_113219_Chrome.jpg
    Screenshot_20250226_113219_Chrome.jpg
    86.2 KB · Views: 0
Hey @Swifty, as I was thinking more about your observations here, it occurred to me that when you asked me last summer, in mid October, to describe the smell(s) of the G13 Haze, I replied by saying they were subtle at best; or subdued by comparison to the way they smelled just a month earlier, in mid September; which correlates with what you were saying about how your plants tend to smell around the end of August.

At the time, I was thinking that the lack of smell, from organically grown plants, might be due to their IBL status; and possibly the cooler October temps. It didn't occur to me, at the time, that the October light spectrum may have played a role as well. Then MIGRO Shane dropped this next video, which got me to think again:

Is far red good for yield and potency? || MIGRO Shane

According to the published studies mentioned by Shane, too much far red light has a negative effect on terps; and according to Google, far red light increases dramatically in the fall and winter months, peaking in December at this latitude:

View attachment 97860

So, assuming those studies are correct, which Shane discusses in that video, it's better to harvest when the far red light is minimal.



To your point about the UVB Light effect on terp development during the veg phase, I will need to provide supplemental indoor UVB to the plants that will be moved outdoors in April; if I follow through with that plan. Not sure if I'll have those UVB tubes in time to do that this season, so I'll limit that experiment to a single plant, this year.

View attachment 97862

Cheers! 😎👍🏻
Hello FF,

I always try to keep in mind that we cultivate for thc production (effect and terps), the plants for survival and that is a big difference imo.
It is easier to see differences when growing the same clones in different set ups indoors and at different times outdoors in order to experience what is possible.
And even what works for one clone can be different for another but in general I find summer-late summer gives better quality than the fall here hence I prefer to force flower outdoors.

Keen to see what you experience in time, thanks for sharing!
 
Great FD sale currently happening over at the MedicGrow LED Grow Light website:

Screenshot_20250529_033213_Chrome.jpg

They are selling an 800 watt Folding LED Bar Light for only $280.00; and new subscribers to their newsletter get an additional 9% off that already hugely discounted sale price. WOW!
 
Back
Top