Trying to reveg Mango Haze

C0URAGE

New member
1000002212.jpgseems to have stopped progressing on growing this new part. Plant is getting 200-280ppfd 24/7 for the past week, was getting 300-400ppfd 24/7 for a whole month or two prior. Had a couple separate days it got around 8hrs darkness from light problems. Clover had overgrown like several inches thick, so prob why new leaves had yellowed. Already chopped away most of the clover, not trying to let grow back now. Using masterblend at 2.4-1.2-2.4. In coco.

Just looking for advice, obviously was stupid to let the clover grow. Wanted to plant the clover outside after I got some clones off this. Didn't go as planned. Trying to save this mango haze, half turns purple. Yields like crazy off a small plant from veg. Was only using (edit)500w over a 3x4 area. Plant covered up to a third of that space and it filled a 5g bucket. Was pretty larfy bud, but know it was due to high temp/low ppfd because tops were pretty dense. Mold resistant cuz very shitty air circulation, and it lasted 10-12weeks til harvest.
 
Last edited:
View attachment 118430seems to have stopped progressing on growing this new part. Plant is getting 200-280ppfd 24/7 for the past week, was getting 300-400ppfd 24/7 for a whole month or two prior. Had a couple separate days it got around 8hrs darkness from light problems. Clover had overgrown like several inches thick, so prob why new leaves had yellowed. Already chopped away most of the clover, not trying to let grow back now. Using masterblend at 2.4-1.2-2.4. In coco.

Just looking for advice, obviously was stupid to let the clover grow. Wanted to plant the clover outside after I got some clones off this. Didn't go as planned. Trying to save this mango haze, half turns purple. Yields like crazy off a small plant from veg. Was only using (edit)500w over a 3x4 area. Plant covered up to a third of that space and it filled a 5g bucket. Was pretty larfy bud, but know it was due to high temp/low ppfd because tops were pretty dense. Mold resistant cuz very shitty air circulation, and it lasted 10-12weeks til harvest.

View attachment 118430seems to have stopped progressing on growing this new part. Plant is getting 200-280ppfd 24/7 for the past week, was getting 300-400ppfd 24/7 for a whole month or two prior. Had a couple separate days it got around 8hrs darkness from light problems. Clover had overgrown like several inches thick, so prob why new leaves had yellowed. Already chopped away most of the clover, not trying to let grow back now. Using masterblend at 2.4-1.2-2.4. In coco.

Just looking for advice, obviously was stupid to let the clover grow. Wanted to plant the clover outside after I got some clones off this. Didn't go as planned. Trying to save this mango haze, half turns purple. Yields like crazy off a small plant from veg. Was only using (edit)500w over a 3x4 area. Plant covered up to a third of that space and it filled a 5g bucket. Was pretty larfy bud, but know it was due to high temp/low ppfd because tops were pretty dense. Mold resistant cuz very shitty air circulation, and it lasted 10-12weeks til harvest.
Hi Courage- i.m.o.As you know the majority of this plant is dead or dying.But there seems to be quite a bit of life in the top.All of the dead or dying parts are draining what energy the plant has because the plant is trying to heal the damaged parts.You need to remove the dead parts.
This is just a shot in the dark-- a last ditch effort.----- Sit down,roll a joint,get a drink and bit by bit cut away all of the dead and dying parts.If you see even a bit of new growth leave that part on.If you end up with only a stalk and the live top and a couple of branches you are better off than what you have now.
As for light--- I'm not sure.I would guess softer light at 24 hours a day
for now.I grow only outside. Maybe someone else could chime in on that topic.
I'd keep her dry.She is not using much water and you don't want rot.
Some people root prune at certain times.I don't know anything about when it helps but the process is simple.
Consider taking most or all of the big fan leaves off.
If it lives it should push out some new growth from where you cut.
Good luck and check back and give us a progress report.
 
Hi Courage- i.m.o.As you know the majority of this plant is dead or dying.But there seems to be quite a bit of life in the top.All of the dead or dying parts are draining what energy the plant has because the plant is trying to heal the damaged parts.You need to remove the dead parts.
This is just a shot in the dark-- a last ditch effort.----- Sit down,roll a joint,get a drink and bit by bit cut away all of the dead and dying parts.If you see even a bit of new growth leave that part on.If you end up with only a stalk and the live top and a couple of branches you are better off than what you have now.
As for light--- I'm not sure.I would guess softer light at 24 hours a day
for now.I grow only outside. Maybe someone else could chime in on that topic.
I'd keep her dry.She is not using much water and you don't want rot.
Some people root prune at certain times.I don't know anything about when it helps but the process is simple.
Consider taking most or all of the big fan leaves off.
If it lives it should push out some new growth from where you cut.
Good luck and check back and give us a progress report.
B.T.W --- Welcome as a new member.You'll fit right in.
 
@C0URAGE she looks like she wants to live, Coney has the right idea, prune most of the dead flower off so the energy goes into the new growth, when i re-veg in coco i use half strength nutes but keep the cal/mag at the recommended dose, never let the coco fully dry out and also aim for about 10% run off, 18/6 for light cycle usually takes a month or more, good luck hope you can save her.
 
Hello, Iam standing with colleagues.
Clip diyng parts and keep all green parts that should pop new growth.
 
Back
Top